Size Runs and Grading: How US Brands Spec Their First Woven Order

The measurement chart is the part of a tech pack that decides whether the sample fits, and the size run is the part that decides whether the order sells. Both are grading decisions, and US brands making their first woven order tend to under-specify both. This is how size runs and grading work on our floor: what the chart needs, how the pieces divide, and what the sample chain actually proves about fit.

The short answer: a size run is the set of sizes a style ships in, the graded measurement chart is the size-by-size spec the pattern is built from, and the pieces of your minimum split across that run. One style, two colorways, six sizes: the colorways count toward one minimum, and the sizes divide it.

What is a size run?

The size run is the list of sizes a style ships in: XS through XL, or numerical, or a brand’s own curve. The run is a merchandising decision before it is a production one, because it decides who the style actually fits and therefore who buys it. A woven shirt that only exists in S and M has given away every customer who wears L or up, before a single yard of fabric is cut.

On the production side the run has one technical meaning: every size in it gets its own graded measurements, its own graded pattern piece set, and its own share of the cut. A style at 1,000 pieces across five sizes keeps five pattern sets in play, not one flat pattern, and the patterns are graded in Lectra from the approved base.

What does the graded measurement chart need?

The graded measurement chart is the per-size table the pattern room builds from: chest, waist, sleeve length, collar, body length, and every other point of measure, each listed per size with a tolerance. Two rules make a chart work:

  • Measurements per size, with tolerances. A chart that lists only the sample size and hopes is not a chart. Each size carries its own numbers, and each number carries the tolerance the finished garment is checked against.
  • One base size, graded from it. We cut and fit the base size first, then grade the rest from the approved base. Naming the base size in the tech pack tells the factory which size the fit samples run in.

The pre-production sample gets checked against this chart across sizes, not only at the base, so the chart is what the whole order is measured against at final inspection.

How does the minimum split across the size run?

The pieces divide across the size run the way the brand’s customers buy. A 1,000-piece style can split 200 per size across five sizes, 250 across four, or tilt toward the sizes that sell: the split is the brand’s call, and what we need is the split in writing, per size, before cutting is released.

Two rules hold the math together. Colorways of the same design count toward the same style, so a shirt in white and navy at 500 pieces each is still one style at the 1,000-piece minimum. And the size mix is not locked forever: if your first-run sales show size L outselling S two to one, the next order’s split moves with it.

How does grading connect to sampling?

The sample chain is where grading earns its keep, and a sampling round runs one to two weeks, so plan two rounds. The proto tests the design; the fit sample tests the shape on the base size; and the pre-production sample gets measured across the size run, not just at the base, so a grading error is caught before bulk cutting rather than at a customer’s door. Fit comments apply per size: a chest that fits in M can be tight in XL, and the correction is graded, not copied.

This is also why the measurement chart’s tolerance matters. Bulk garments are checked against the chart’s numbers within the tolerance, so a tolerance that was written loosely gets enforced loosely. The full conversation, how bands get set per point of measure and what an inspector does with a size that measures out, sits in the measurement tolerances guide.

Grade rules, the increments between sizes, are the other half of the chart: the amount the chest grows from S to M, the sleeve from M to L. They are brand decisions, and the pattern room can advise on what the weave tolerates, but the growth curve is the brand’s to name, because it is the shape of the customer the brand is dressing.

Size runs and grading: the quick answers

What is a size run in clothing production?

The set of sizes a style ships in. Every size in the run gets its own graded measurements and its own share of the cut.

How many sizes should a first woven order run?

The sizes your customers buy, not the largest set you can list. Fewer sizes with a cleaner split beats a sprawling run that fragments the cut; the pilot’s size-curve data tells you which sizes earned their place for the next order.

What if I don’t know my size split yet?

Run the pilot and let the data decide. A 500-piece-per-style run produces the size-curve read that sets the next order’s split, on evidence instead of hope.

Do colorways count as separate styles?

No. Two colorways of one garment design are one style, and their pieces count together toward the minimum. The size split applies across the combined quantity.

What is a graded measurement chart?

The size-by-size measurement spec, with tolerances, that the pattern is built from and bulk is checked against. It lives in the tech pack, and the pre-production sample is measured against it across every size.

What is a base size?

The size the pattern is cut and fitted first, named in the tech pack, with every other size graded from it. Fit samples run in the base size unless the brand says otherwise.

Bring the size run, the base size, and the graded chart to the quote, and we prove the fit before the container is booked. Start a quote here or book capacity with the size mix already named.

Scroll to Top